Computer Use Precautions
Please abide by the following safety precautions and precautions to guarantee the safe operation and avoid casualties in the process of using this product:
1. This machine is only applied to power type marked on the nameplate, and power regulator must be equipped when the voltage fluctuation is over 10%.
2. The power line shall be fixed for safety protection, and it cannot bear forces.
3. The equipment must be grounded. If grounded improperly, it may lead to electric shock and impact the safety operation of the product.
4. The repair and debugging of electrical component shall not be conducted by non-professionals,for it may reduce the safety performance, increase faults and even lead to casualties and property loss.
5. Cut off the power of the machine before opening the computer case cover. When contacting the internal parts, it must wait for a minute after the power is cut off. When contacting the servo amplifier, it shall wait for 10 minutes after the power is cut off.
6.The machine is forbidden to operate when the shield of moving parts is defected.
7. The machine is forbidden to operate in damp and dusty places, or with corrosive gas and inflammable and explosive gas, or it may give rise to electric shock or fire.
8. Insulation test of the input and output circuit of the controller is forbidden, or it may damage the electric equipment,
9. Please change the fuse according to the specification indicated by the product.
10.The atmospheric pressure of the machine shall be above 6 kg/cm2, or it may lead to the wrong operation of the air valve.
11. During the operation, any moving parts of the machine shall not be touched, or it may damage people.
12.Please use the spare parts and wearing parts provided by the factory.
13.Please use quality-ensured USB disk.
14.The product shall be placed in a clean and ventilating environment. There should not be piles of debris around the control cabinet, for the convenience of heat dissipation. Besides, dust shall be cleaned regularly.
15.Alterations of the manual will be added in the attachment. If the newly added contents are in conflict with the original contents, the newly added contents shall prevail.
16. The company will not undertake any responsibility for consequences of unauthorized alterations of products.
